P-scan Stack System - Automated Ultrasonic Inspection

The P-scan Stack System’s technical specifications1080-2pix-gradient

The P-scan Stack System with phased array represents a completely new way of thinking when it comes to automated ultrasonic inspection. The Stack System beats all existing automated phased array systems on technical specs. As a result, you can perform high-precision inspections quickly and accurately – even in the most challenging environments.

Inspect challenging materials

With the highest dynamic range and amplitude resolution available, you know you’ll never miss a signal, no matter how high or low the amplitude. The high frequency range and pulser voltage of the phased array channels enable you to inspect a wide range of materials, including challenging materials that you couldn’t previously inspect. And, with high data throughput and unlimited data file size, you get faster inspections, no matter how big the test object. You’ll find all this in the lightest and most robust all-in-one system available.

Below you will find fully specified tables with all the technical information of the entire Stack System. Scroll down and read about the processors, batteries, pump, software and power.

General technical specifications

ChannelsNumber of phased array channels
Number of standard UT channels
Up to 256/512
Up to 32
TransmitterPulse type
Amplitude
Rise time
Width
Rectangular, bipolar
80 V – 200 V (±40 V - ± 100 V)
7 ns
20 ns – 2 μs
ReceiverDynamic range
- Phased array channels
- Standard UT channels
Frequency range
- Phased array channels
- Standard UT channelse
Rectification
Filters
Input noise

>100 dB @ 5 MHz std. filter, 32 element aperture
>112 dB w. @ 5 MHz std. filter

0.09 – 28 MHz
0.06 – 30 MHz
Digital, user selectable
Digital, user selectable
<2 nV/√Hz, typical
DigitisationSampling rate
Resolution
Maximum number of sample
Dynamic depth focusing
Number of focal laws
Real time data compression
120 MHz
22 bit
131.072
Yes
8.192
User selectable
ConnectorsPhased Array connectors
Phased Array connector type
Phased Array probe recognition
Standard UT connectors
Standard UT connector type
Scanner connector
Link connectors
External Modules connector
Click-and-Play connectors
Ethernet connector
Up to 8
I-Pex
Automatic
Up to 8, each connector serving 4 probes
Fischer (Lemo 00 using QCA adaptor)
Fischer
2 x Fischer
Fischer
2 x MILL-MAX
RJ45 (IP54 protected)
PC connectionNetwork interface
Data throughput
Ethernet 1000Base-T
Up to 30 MB/sec
Other featuresIntegrated scanner controller
Battery operation
Self check
Air intake
Yes
Yes, including scanner
Yes
No
Physical specificationsEnvironmental protection
Temperature range
IEC class IP54 (Protected against dust and splashing water)
0 – 40° C (32 – 104 °F) standard
0 – 50° C (32 – 122 °F) extended

P-scan Stack Processor PA 32


Specific technical specifications

ChannelsNumber of Phased Array channels
Phased Array connector
Number of standard UT channels
Standard UT connectors
32/64
1 x I-Pex
8
2 x Fischer (8 channels)
Physical specificationsSize (H x W x D)
Weight
171 x 223 x 255 mm /6.7 x 8.8 x 10.0 inch)
5.7 Kg (12.6 lb)

P-scan Stack Processor PA 64


Specific technical specifications

ChannelsNumber of Phased Array channels
Phased Array connectors
Number of standard UT channels
Standard UT connectors
64/128
2 x I-Pex
8
2 x Fischer
Physical specificationsSize (H x W x D)
Weight
171 x 223 x 255 mm /6.7 x 8.8 x 10.0 inch)
6.1 Kg (13 lb)

P-scan Stack Processor PE 8


Specific technical specifications

ChannelsNumber of standard UT channels
Standard UT connectors
8
2 x Fischer (8 channels)
Physical specificationsSize (H x W x D)
Weight
171 x 223 x 255 mm /6.7 x 8.8 x 10.0 inch)
5.3 Kg (11.7 lb)

P-scan Stack Battery 4


Technical specifications

BatteryBattery type
Batteries
Battery capacity
Battery management
Li Ion
4
Up to 8 hours, including scanner
Hot swapping
ConnectorsClick-and-Play connectors2 x MILL-MAX
Physical specificationsSize (H x W x D)
Weight (without batteries)
Weight (with batteries)
Environmental protection
Temperature range
104 x 223 x 255 mm /4.1 x 8.8 x 10.0 inch)
3.3 Kg (7.3 lb)
5.1 Kg (11.2 lb)
IEC class IP54 (Protected against dust and splashing water
0 – 50° C (32 – 122 °F)

P-scan Stack Power 2


Technical specifications

Input/OutputInput
Output
100 - 240 V AC, 50 - 60 Hz
24 V DC, 9.1 A
ConnectorsInput connector
Click-and-Play connectors
IEC C14
2 x MILL-MAX
Physical specificationsSize (H x W x D)
Weight
Environmental protection
Temperature range
79 x 223 x 255 mm /3.1 x 8.8 x 10.0 inch)
2.9 Kg (6.4 lb)
IEC class IP54 (Protected against dust and splashing water)
0 – 40° C (32 – 104 °F) standard
0 – 50° C (32 – 122 °F) extended

P-scan Stack Pump 4


Technical specifications

FlowFlow rateAdjustable
Hose fittingsInput/outputFor 8 mm OD hose
ConnectorsLink connector
Click-and-Play connectors
Fischer
2 x MILL-MAX
Physical specificationsSize (H x W x D)
Weight
Environmental protection
Temperature range
79 x 223 x 255 mm /3.1 x 8.8 x 10.0 inch)
3.2 Kg (7.1 lb)
IEC class IP54 (Protected against dust and splashing water)
0 – 50° C (32 – 122 °F)

P-scan Stack Software


Technical specifications

Software platformOperating system
Input mode
Win 7 / Win 8 (64-bit)
Touch Screen, Keyboard, Mouse
File storageMaximum data file sizeLimited to hard drive size
Hardware requirementsProcessor
RAM
Hard drive type
Hard drive size
Network interface
Screen size
Screen format
Screen resolution
Screen type
Intel I7 Quadcore
Min. 8 GB
SSD
Min. 128 GB
Ethernet 1000Base-T
Min. 13”
16:9
Min. 1680 x 1050
Touch Screen (optional)

Specifications are subject to change without notice